|
Post by Davotoo on May 16, 2004 18:53:53 GMT -5
I anyone here was wondering what the inside of that injector pump was like here are some pix of one I took. I'm in a wheelchair so with the help of my wife we have replaced the throttle shaft O ring on 2 of out 3 trucks. About a 4 hour $800 labor and $1.50 for the robby boche O ring. You will need an extra nut to lock ths calibration screw to the lock nut that already there. www.northshells.net/pump/Don't try taking the top off with out locking the calibration screw in place and backing both nuts and the screw all the way out.
|
|