|
|
Post by richardl on Feb 23, 2021 12:12:27 GMT -5
Ok so I bent the throttle lever in my pump. The injection shop I brought it to can't source parts for my pump. Does any one have a pump or know of where I can get a pump I can purchase.?
Also my pump is the 2 studs to the motor not 3.
Any help would be awesome.
Thanks
Richard.
|
|
|
|
Post by richardl on Feb 24, 2021 6:45:15 GMT -5
I've read that a Cummins 4bt pump will work it will just pump more fuel than needed. Has anyone done this? Is it a bolt-on plug-and-play? The one's I've seen have a triangular bolt pattern. My pump is only a 2 bolt. Do I need to do some kind of modification?
Thanks
|
|
|
|
Post by rustytruck on Feb 24, 2021 23:03:16 GMT -5
I've never heard of that swap before. I think the earlier 4bt was a rotary style pump but pretty sure most had an inline one. If that worked you might be better off trying to modify a 240d mercedes pump to work.
The cummins is 3.9 litres so the fuel flow would be nearly double.
Do you have a photo of the part you need? I don't have a complete pump but have two disassembled ones
|
|
|
|
Post by richardl on Feb 25, 2021 7:41:53 GMT -5
Hi,
No, I don't have a photo. But it is the main fuel lever inside the pump. The full load set screw pushes on it.
I can try to get a picture of it later today.
Thanks
Richard
|
|
|
|
Post by montana on Mar 11, 2021 3:45:49 GMT -5
|
|
|
|
Post by tempforce on Jun 13, 2021 11:13:51 GMT -5
contact: dieselswappeds10 see if he still has the injector pump off his engine. he's scrapping it out..
|
|
