jboz
New Member
Posts: 6
|
Post by jboz on Dec 2, 2020 12:03:43 GMT -5
So I have an 83 ranger 2.2L, while flushing out the coolant i noticed i had water coming from the block. After taking the Bracket for the A/C compressor off something that looks like an expansion plug "freeze plug" had a hole in it. All of the expansion plugs on rock auto and oreilly are 30MM or bigger and this one is more like 3/4 of an inch so around 19MM. If anyone knows a part number or how I should find this part it would be greatly appreciated. This picture is the front drivers side of the engine above the Injector pump.  |
|
|
|
Post by montana on Dec 9, 2020 18:15:55 GMT -5
Don't have a part number but bought mine at Napa. It's been 17yrs but if I remember correctly they had to look it up under the Mazda B2200 NOT the Ford Ranger.
|
|
|
|
Post by dieseldawg on Dec 9, 2020 20:00:52 GMT -5
Mazda shows the same part# as Ford 99306-2000. I had no luck finding that part online. A Ford or Mazda dealer might tell you more.
|
|
|
|
Post by montana on Dec 9, 2020 21:54:13 GMT -5
I just took a look over on Rockauto's website and they have them.
|
|
|
|
Post by dieseldawg on Dec 10, 2020 7:50:17 GMT -5
Dorman makes a rubber expansion plug which is listed as 3/4"-7/8". Part# 02608
|
|
