1983 b2200 signals/stop light wiring diagrams

[stinky]

Hi everyone, trying to get my new to me 83 B2200 road worthy again.

The problem I’m dealing with right now is the signal lights/brake lights. The whole right side did not work, I found host of corroded and broken wires and fixed them and now the signals and park lights work, but they still hyperflash intermittently. Also the brake lights still don’t work. Was hoping someone could point me to the wiring diagrams for the turning and stop light circuits.

I’m also happy to receive any pointers or ideas. Thanks!

[rob]

Are you sure the light housing is grounded to the body?
Rob

[stinky]

It ended up being a bad ground yep thanks for the pointer! if testing at the back of the front light housing the ground was OK, but if testing the actual light socket it there was a very weak ground which threw me off. I fixed the ground and the signals stopped hyper flashing. As far as the brake lights not working, I found the white/blue wire going from the headlight switch to the brake light switch had a bad connection, cleaned that up and they’re working now.