|
Post by widetrack212 on Jul 5, 2015 22:50:48 GMT -5
Well i think my transmission came apart today, going down the interstate, got off and got back up to about 30 had a really bad vibration, crawled under the truck, a steel sleeve had slid out the back of the tailshaft pushing the seal out with it... I think the bearings are possibly screwed now.. It happened out of no where. The only thing prior to this was it had a very slight vibration above 65-70mph.. Didnt think anything of it cause it was very small and its an old truck.. If anyone has had experience with this problem I would love to know how to fix it. Gonna be pulling it out/apart tomorrow.
|
|
|
Post by Dogfather on Aug 11, 2015 17:03:42 GMT -5
Hey Widetrack what state you in?
|
|
|
Post by widetrack212 on Aug 11, 2015 22:45:43 GMT -5
Indiana
|
|
|
Post by Dogfather on Aug 17, 2015 20:47:43 GMT -5
so did you get it out?
Edward Rochester, Wa
|
|
|
Post by widetrack212 on Aug 17, 2015 20:53:38 GMT -5
Yeah I got a transmission from a junkyard truck had 70,000 miles. Went through 2 engines.. Guy didnt know to check the valve adjustment lol.
|
|
|
Post by widetrack212 on Aug 17, 2015 20:54:20 GMT -5
The junkyard transmission has been in it for about 450 miles
|
|
|
Post by Dogfather on Aug 18, 2015 10:08:08 GMT -5
oh wow lucky dog... Guess I should call around...
|
|
|
Post by widetrack212 on Aug 18, 2015 21:47:09 GMT -5
It was the only transmission in the U.S.A lol just happened to be only 2 hours away.. The rest are in canada
|
|