|
Post by dangerranger on Mar 5, 2015 12:46:44 GMT -5
Hey guys, I changed out the starter on my 83 ranger but when I bolted the GP relay back on I got confused. There is two wires that come off of the relay, when i unbolted it, one I assume is a ground due to the size of the ring terminal on it. The other wire is a little longer and has a larger ring terminal on it, does this one go to the battery hot on the starter solenoid? Thanks.
|
|
|
Post by dieseldawg on Mar 5, 2015 22:47:05 GMT -5
Here's a diagram that might help
|
|
|
Post by dangerranger on Mar 6, 2015 10:29:42 GMT -5
That's what I needed, thank you.
|
|
|
Post by DieselDangerRanger on Mar 7, 2015 22:48:57 GMT -5
Funny, the pre-glow (no. 1 sol.) on the starter was controlled by an orange wire, not Bk. shown in the diagram. I wonder, do you have a charging and power dist. diagram also, dieseldawg?
|
|
|
Post by gradyc on Mar 8, 2015 0:24:13 GMT -5
|
|
|
Post by DieselDangerRanger on Mar 8, 2015 9:06:28 GMT -5
Sweet! Thanks, GradyC!
|
|