|
Post by phillip.brannon on Apr 16, 2014 8:41:45 GMT -5
Long story short...mine went out this morning on the way to work.... is a rebuild my best option...eBay has none...just seeing what others have done...thanks guys.
|
|
|
Post by montana on Apr 16, 2014 10:39:20 GMT -5
Too bad this didn't happen a few months ago, ebay had one for $50 buy it now, needless to say it didn't last very long. Napa has reman'd pumps for $165 or you can go thru Rockauto and have your pump rebuilt for $128, others may know of better options.
|
|
|
Post by phillip.brannon on Apr 16, 2014 10:45:02 GMT -5
i think were just going to try and rebuild it ourselves.... i found the procedure on here and it seems not to be to hard....only problem now is trying to get the dang thing off...
|
|
|
Post by 83rangerguy on Apr 17, 2014 17:51:20 GMT -5
Do you have a link you can post for rebuilding the water pump? I'd like to save it for future reference.
|
|
|
Post by phillip.brannon on Apr 18, 2014 21:08:49 GMT -5
|
|
|
Post by 83rangerguy on Apr 19, 2014 16:50:28 GMT -5
Thanks! that's good info to have...would anyone happen to have part #'s for the bearing and seal? sure would be cheaper to rebuild your own pump even if you had to pay 1/2 hour shop time for the press.
|
|
|
Post by phillip.brannon on Apr 21, 2014 9:10:06 GMT -5
if my guy can figure out the bearing and seal ill post them up...hes trying to figure it out now
|
|
|
Post by wdjd2004 on Sept 25, 2014 21:10:30 GMT -5
Im in the middle of rebuilding my pump now. It took a lot of research but i finally got all the parts. I can rebuild them if any one needs it, or i can share how.
the seal is available through MSC. McMaster Carr and grainger.
|
|
|
Post by Big diesel on Mar 23, 2015 15:51:24 GMT -5
Hello I am trying to rebuild mine. We're you able to get the part nunbers for the seals and bearings
|
|
|
Post by Billy423 on Mar 17, 2017 19:19:23 GMT -5
Hello I am trying to rebuild mine. We're you able to get the part nunbers for the seals and bearings Did anyone ever find out the seal and bearing part numbers?
|
|
|
Post by dieseldawg on Mar 18, 2017 6:30:32 GMT -5
Copied from a post by ranger05055: Just an update. Ordered the bearings and seal from mcmaster, in case anyone wants to follow suit:
Pump Shaft Seal (1 needed) 304 Stainless Steel, 1/2" ID, 1.125" Seal OD, Industry Number 80509
9281K84
Permanently Lubricated Ball Bearing (2 needed) Double Sealed-Metric, Trade No. 6204-2RS
2349K423
|
|