|
Update.
Aug 26, 2015 19:11:00 GMT -5
via mobile
Post by widetrack212 on Aug 26, 2015 19:11:00 GMT -5
We recently just pulled the engine to seal oil leaks. Now running again. Beds coming off to drop the tank sat for a couple years so its all gunked up. If im correct theres a filter on the pickup hose? Heres 2 videos of it running. youtu.be/0Ve3ysdlwsoyoutu.be/bsLDlxJE4cQ
|
|
|
Update.
Aug 27, 2015 23:50:13 GMT -5
Post by gradyc on Aug 27, 2015 23:50:13 GMT -5
I watched the first one but when I tried to watch the second it gave the message that it is a private video. The truck sounds good and the turbo installation looks very good.
|
|
|
Update.
Aug 28, 2015 20:23:39 GMT -5
via mobile
Post by dawg67 on Aug 28, 2015 20:23:39 GMT -5
I may be wrong but rob said the pick up tube had a 90 degree bend that ran parallel with the bottom of the tank with no filter on it
|
|
|
Update.
Aug 29, 2015 11:09:45 GMT -5
via mobile
Post by widetrack212 on Aug 29, 2015 11:09:45 GMT -5
I watched the first one but when I tried to watch the second it gave the message that it is a private video. The truck sounds good and the turbo installation looks very good. Thanks, I checked the video it should be public now. There's some things I want to change and some things are gonna be redone. The 18:1 compression ratio seems to work really good, It really needs a tighter exhaust housing for the turbo. Very late spool. It has a .63 ar housing, im gonna try a .48 next. Other than that I dont really have anything wrong with it.
|
|
|
Update.
Aug 29, 2015 11:11:38 GMT -5
via mobile
Post by widetrack212 on Aug 29, 2015 11:11:38 GMT -5
I may be wrong but rob said the pick up tube had a 90 degree bend that ran parallel with the bottom of the tank with no filter on it I'll do some reading up. Gonna try to pull the tank tonight.
|
|
|
Update.
Aug 30, 2015 20:23:54 GMT -5
via mobile
Post by widetrack212 on Aug 30, 2015 20:23:54 GMT -5
Check out this link m.instructables.com/id/Electrolytic-Rust-Removal-From-A-Motorcycle-Gas-Ta/ new way to clean a tank, never thought of it others were saying do this for like 10 hours. Mine has been in the process at 3 hrs, it'll be like that till about 5pm. Mine already has a lot of rus gunk and dirtt with in the mixture. Ended up just leaving the bed on it. The pickup tube does not have a filter on it, my bad, thought I had read that.
|
|